Lease this WebApp and get rid of the ads.
mary
remote sensor
Thu Apr 8, 2010 3:05pm
76.230.11.124

remote sensor appears to not be working. We cannot get it to respond to any universal remotes and no longer have the original remote. Is is possible that the sensor needs replacing. Any suggestions. thanks.

  • Re: TOSHIBAAnonymous, Tue Jan 13 7:48pm
    TOSHIBA CX32E70 N/A CHANNELS WITHOUT A SIGNAL ARE BEING PROGRAMMMED DURING AUTO-PROGRAMMING CHECK/REPLACE CA13 AND CA36 WITH 220pF (P/N# 24474221) TOSHIBA CX32E70 N/A DEAD SET CHECK/REPLACE F899... more
    • remote sensor — mary, Thu Apr 8 3:05pm
    • C227T31Jay, Fri Jul 3 7:35pm
      Remote control no longer turns TV on/off and does not change channels - everything else on remote control works - batteries have been changed several times Can anyone tell me what the problem is and... more
    • Re: TOSHIBAAnonymous, Tue Jan 13 7:57pm
      Toshiba 27h50 horizontal out blowed (many times) check & change ac 110v power plug and add 470 uf from base of 12v reg to gnd Comments:bad contact on ac plug generate supply peaks that deteriorates... more
      • CX32C81Anonymous, Mon Oct 27 10:44am
        no sound, No picture green line goes straight across the middle of the tv
        • Re: CX32C81Anonymous, Tue Oct 28 9:46am
          Sounds like no vertical sweep. Check vertical ic and it blown side of ic must check for open resistor and shorted diode feeding dc to vertical. Now also would check qf03 9v regulator for poor... more
      • ToshibaAnonymous, Mon Sep 6 11:37am
        Toshiba CE32T11 Customer Complaint: Dead set The TV was dead except that the power LED was on. After checking the standby power and finding it to be ok, I found that there was no drive to the power... more
Click here to receive daily updates