Lease this WebApp and get rid of the ads.
Anonymous
Re: SONY
Thu Dec 25, 2003 4:25pm
24.235.162.109

SONY
KV27XBR15
N/A
DEAD SET -RELAY DOES CLICK - SET MAY COME ON AFTER BEING PLUGGED IN AND TURN ON FOR 5-10 MINUTE,THEN HAS NARROW PIX
CHECK/REPLACE C665 (1000uF @ 25)


SONY
KV27XBR15
N/A
INTERMITTENTLY GOES DEAD - DEAD SET - SHUTS OFF
CHECK/RESOLDER CONNECTIONS ON IC581 AND IC582


SONY
KV27XBR15
N/A
INTERMITTENT LUMINANCE
CHECK/RESOLDER CONNECTIONS ON DL-302


SONY
KV27XBR15
N/A
PINCUSHION DISTORTION
CHECK/REPLACE L501,R571 AND Q505 AND CHECK TO SEE IF D512 IS PENETRATING THRU CIRCUIT BOARD


SONY
KV27XBR15
N/A
CLOCK RUNS TOO FAST
ADD 0.1uF TO BASE OF Q105 TO GROUND (P/N# 1-124-463-00)


SONY
KV27XBR15
N/A
RETRACE LINES VISIBLE AT THE TOP OF SCREEN
CHECK TO SEE IF SERVICE MODE 'REF' IS SET CORRECTLY - IT SHOULD BE SET AT 1 BUT RETRACE WILL APPEAR WHEN SET TO 0


SONY
KV27XBR15
N/A
CLOCK RUNS TOO FAST
CHANGE C125 TO A 0.1uF @ 50v CAPACITOR (P/N# 1-124-463-00)


SONY
KV27XBR15
N/A
MANUAL POWER BUTTON WILL NOT WORK
CHECK/REPLACE C125 - REPLACE WITH A BI-POLAR TYPE (P/N# 1-124-272-91)


SONY
KV27XBR15
N/A
NO PICTURE BUT DOES HAVE SOUND
CHECK/RESOLDER CONNECTIONS ON T501


SONY
KV27XBR15
N/A
HORZ RED,BLUE AND GREEN LINES IN THE PICTURE
CHECK/REPLACE R517 (P/N# 1-216-355-91) , IC500,IC301


SONY
KV27XBR15
N/A
PICTURE BLANKS ON IN-ACTIVE STATIONS
CHECK/REPLACE D303 ON THE 'A' BOARD


SONY
KV27XBR15
ANU1
REPEATED FAILURE OF THE HORZ. OUTPUT XSTR.
CHECK/REPLACE WITH NEW TYPE P/N# 8-729-016-32 AND CHANGE R523 TO A 0.68 ohm P/N# 1-216-347-11


SONY
KV27XBR20
N/A
INTERMITTENTLY GOES DEAD - DEAD SET - SHUTS OFF
CHECK/RESOLDER CONNECTIONS ON IC581 AND IC582


SONY
KV27XBR20
N/A
CLOCK RUNS TOO FAST
CHANGE C125 TO A 0.1uF @ 50v CAPACITOR (P/N# 1-124-463-00)


SONY
KV27XBR26
N/A
INTERMITTENT CLOSED CAPTION CHARACTER ERROR IN WEAK SIGNAL CONDITIONS - MAY SHOW A WHITE CHARACTER OR BLACK BOX
CHANGE VALUE OF R3443 FROM 470 TO A 100 (P/N# 1-216-025-00)


SONY
KV27XBR26
N/A
DEAD SET -RELAY DOES CLICK - SET MAY COME ON AFTER BEING PLUGGED IN AND TURN ON FOR 5-10 MINUTE,THEN HAS NARROW PIX
CHECK/REPLACE C665 (1000uF @ 25)


SONY
KV27XBR26
N/A
NO CLOSED CAPTION ON AIR SIGNAL
CHECK/RESOLDER CONNECTIONS ON IC3442 PINS #13 AND #14 - MAY BE A SOLDER BRIDGE BETWEEN THESE TWO


SONY
KV27XBR26
N/A
INTERMITTENT LUMINANCE
CHECK/RESOLDER CONNECTIONS ON DL-302


SONY
KV27XBR26
N/A
INTERMITTENTLY GOES DEAD - DEAD SET - SHUTS OFF
CHECK/RESOLDER CONNECTIONS ON IC581 AND IC582


SONY
KV27XBR29
N/A
POOR FOCUS ON EDGES - FOCUS IS NOT UNIFORM
CHECK/RESOLDER CONNECTIONS ON Q908


SONY
KV27XBR29
N/A
INTERMITTENTLY GOES DEAD - DEAD SET - SHUTS OFF
CHECK/RESOLDER CONNECTIONS ON IC581 AND IC582


SONY
KV27XBR35
N/A
UNIT SHUTS DOWN WHEN TURNED ON
CHECK/REPLACE D1409


SONY
KV27XBR35
N/A
INTERMITTENTLY GOES DEAD - DEAD SET - SHUTS OFF
CHECK/RESOLDER CONNECTIONS ON IC581 AND IC582


SONY
KV27XBR36
N/A
NO CLOSED CAPTION ON AIR SIGNAL
CHECK/RESOLDER CONNECTIONS ON IC3442 PINS #13 AND #14 - MAY BE A SOLDER BRIDGE BETWEEN THESE TWO


SONY
KV27XBR36
N/A
INTERMITTENT CLOSED CAPTION CHARACTER ERROR IN WEAK SIGNAL CONDITIONS - MAY SHOW A WHITE CHARACTER OR BLACK BOX
CHANGE VALUE OF R3443 FROM 470 TO A 100 (P/N# 1-216-025-00)


SONY
KV27XBR36
N/A
INTERMITTENT LUMINANCE
CHECK/RESOLDER CONNECTIONS ON DL-302


SONY
KV27XBR36
N/A
INTERMITTENTLY GOES DEAD - DEAD SET - SHUTS OFF
CHECK/RESOLDER CONNECTIONS ON IC581 AND IC582


SONY
KV27XBR36
N/A
DEAD SET -RELAY DOES CLICK - SET MAY COME ON AFTER BEING PLUGGED IN AND TURN ON FOR 5-10 MINUTE,THEN HAS NARROW PIX
CHECK/REPLACE C665 (1000uF @ 25)


SONY
KV27XBR37
N/A
SQUEAL FROM HORIZONTAL LINEARITY COIL
CHECK/REPLACE L509 (P/N# 1-409-861-11)


SONY
KV27XBR37
N/A
INTERMITTENTLY GOES DEAD - DEAD SET - SHUTS OFF
CHECK/RESOLDER CONNECTIONS ON IC581 AND IC582


SONY
KV27XBR37
N/A
IMPROVEMENT OF POWER SUPPLY CIRCUIT
CHECK/REPLACE JUMPER WIRE LOCATED AT R683 AND R684 WITH A 1 @ 10w RESISTOR (P/N# 1-205-998-11)


SONY
KV27XBR37
N/A
DEAD SET -RELAY DOES CLICK - SET MAY COME ON AFTER BEING PLUGGED IN AND TURN ON FOR 5-10 MINUTE,THEN HAS NARROW PIX
CHECK/REPLACE C665 (1000uF @ 25)


SONY
KV27XBR37
N/A
AUDIO BUZZ (NOISE) FROM SPEAKER
REMOVE R203,R204,R207,R208,R209,R210,C202,C205,IC202 - ADD SHORT BETWEEN IC202 PINS #1 & #3 AND PINS #5 & #7


SONY
KV27XBR37
N/A
NO PICTURE DUE TO FAILURE OF IC301
CHECK/REPLACE IC301 AND ADD D308 (P/N# 8-719-110-17) 10v ZENER - CATHODE TO IC301 PIN #37 AND ANODE TO GROUND


SONY
KV27XBR37
N/A
POPPING SOUND DURING CHANNEL CHANGE
ADD D203 TO 'M' BOARD (P/N# 8-719-109-66)


SONY
KV27XBR45
N/A
WHITE BAR OR HERRINGBONE ACROSS THE SCREEN WHEN A TAPE IS PLAYED BACK OR TAPES WITH COPY GUARD
IF TYPE# ON COMB FILTER IS 'DC' OR 'SBX1797-xx' THEN REPL. WITH TYPE (P/N# A-1341-957-A),CHANGE C1237 w/(1-163-009-11)


SONY
KV27XBR45
N/A
INTERMITTENTLY GOES DEAD - DEAD SET - SHUTS OFF
CHECK/RESOLDER CONNECTIONS ON IC581 AND IC582


SONY
KV27XBR45
N/A
INTERMITTENT PICTURE - SOUND OK
CHECK/RESOLDER CONNECTIONS ON Q405


SONY
KV27XBR50
N/A
PINCUSHION DISTORTION
CHECK/REPLACE L501,R571 AND Q505 AND CHECK TO SEE IF D512 IS PENETRATING THRU CIRCUIT BOARD


SONY
KV27XBR50
N/A
PICTURE BLANKS ON IN-ACTIVE STATIONS
CHECK/REPLACE D303 ON THE 'A' BOARD


SONY
KV27XBR50
N/A
DEAD SET -RELAY DOES CLICK - SET MAY COME ON AFTER BEING PLUGGED IN AND TURN ON FOR 5-10 MINUTE,THEN HAS NARROW PIX
CHECK/REPLACE C665 (1000uF @ 25)


SONY
KV27XBR50
N/A
INTERMITTENTLY GOES DEAD - DEAD SET - SHUTS OFF
CHECK/RESOLDER CONNECTIONS ON IC581 AND IC582


SONY
KV27XBR50
N/A
HORZ RED,BLUE AND GREEN LINES IN THE PICTURE
CHECK/REPLACE R517 (P/N# 1-216-355-91) , IC500,IC301


SONY
KV27XBR50
N/A
CLOCK RUNS TOO FAST
CHANGE C125 TO A 0.1uF @ 50v CAPACITOR (P/N# 1-124-463-00)


SONY
KV27XBR50
N/A
NO SOUND OR PICTURE
CHECK/REPLACE D112


SONY
KV27XBR50
N/A
CLOCK RUNS TOO FAST
ADD 0.1uF TO BASE OF Q105 TO GROUND (P/N# 1-124-463-00)


SONY
KV27XBR50
ANU1
REPEATED FAILURE OF THE HORZ. OUTPUT XSTR.
CHECK/REPLACE WITH NEW TYPE P/N# 8-729-016-32 AND CHANGE R523 TO A 0.68 ohm P/N# 1-216-347-11


SONY
KV27XBR51
N/A
CLOCK RUNS TOO FAST
ADD 0.1uF @ 50V BETWEEN BASE OF Q2601 AND GROUND (P/N# 1-124-463-00)


SONY
KV27XBR51
N/A
DEAD SET -RELAY DOES CLICK - SET MAY COME ON AFTER BEING PLUGGED IN AND TURN ON FOR 5-10 MINUTE,THEN HAS NARROW PIX
CHECK/REPLACE C665 (1000uF @ 25)


SONY
KV27XBR51
N/A
INTERMITTENTLY GOES DEAD - DEAD SET - SHUTS OFF
CHECK/RESOLDER CONNECTIONS ON IC581 AND IC582


SONY
KV27XBR51
N/A
CLOCK RUNS TOO FAST
ADD 0.1uF TO BASE OF Q2601 TO GROUND (P/N# 1-124-463-00)


SONY
KV27XBR51
ANU1
REPEATED FAILURE OF THE HORZ. OUTPUT XSTR.
CHECK/REPLACE WITH NEW TYPE P/N# 8-729-016-32 AND CHANGE R523 TO A 0.68 ohm P/N# 1-216-347-11


SONY
KV27XBR55
N/A
CLOCK RUNS TOO FAST
ADD 0.1uF @ 50V BETWEEN BASE OF Q2601 AND GROUND (P/N# 1-124-463-00)


SONY
KV27XBR55
N/A
INTERMITTENT LUMINANCE
CHECK/RESOLDER CONNECTIONS ON DL-302


SONY
KV27XBR55
N/A
DEAD SET -RELAY DOES CLICK - SET MAY COME ON AFTER BEING PLUGGED IN AND TURN ON FOR 5-10 MINUTE,THEN HAS NARROW PIX
CHECK/REPLACE C665 (1000uF @ 25)


SONY
KV27XBR55
N/A
CLOCK RUNS TOO FAST
ADD 0.1uF TO BASE OF Q2601 TO GROUND (P/N# 1-124-463-00)


SONY
KV27XBR55
N/A
INTERMITTENTLY GOES DEAD - DEAD SET - SHUTS OFF
CHECK/RESOLDER CONNECTIONS ON IC581 AND IC582


SONY
KV27XBR55
N/A
INTERMITTENT HIGH VOLTAGE
CHECK/RESOLDER CONNECTIONS ON L550 OR MOUNTING PINS


SONY
KV27XBR55
ANU1
REPEATED FAILURE OF THE HORZ. OUTPUT XSTR.
CHECK/REPLACE WITH NEW TYPE P/N# 8-729-016-32 AND CHANGE R523 TO A 0.68 ohm P/N# 1-216-347-11


Sony
KV27XBR55

No vertical deflection, line across center
Found no solder on one end of R517, no +DC to IC500


SONY
KV27XBR60
N/A
RETRACE LINES VISIBLE AT THE TOP OF SCREEN
CHECK TO SEE IF SERVICE MODE 'REF' IS SET CORRECTLY - IT SHOULD BE SET AT 1 BUT RETRACE WILL APPEAR WHEN SET TO 0


SONY
KV27XBR60
N/A
INTERMITTENTLY GOES DEAD - DEAD SET - SHUTS OFF
CHECK/RESOLDER CONNECTIONS ON IC581 AND IC582


SONY
KV27XBR60
N/A
PINCUSHION DISTORTION
CHECK/REPLACE L501,R571 AND Q505 AND CHECK TO SEE IF D512 IS PENETRATING THRU CIRCUIT BOARD


SONY
KV27XBR60
N/A
CLOCK RUNS TOO FAST
ADD 0.1uF TO BASE OF Q105 TO GROUND (P/N# 1-124-463-00)


SONY
KV27XBR60
N/A
NO PICTURE BUT DOES HAVE SOUND
CHECK/RESOLDER CONNECTIONS ON T501


SONY
KV27XBR60
N/A
DEAD SET WITH A THUMP THUMP IN SPEAKERS - NO HIGH VOLTAGE
CHECK/REPLACE Q604 (P/N# 8-729-119-78)


SONY
KV27XBR60
N/A
HORZ RED,BLUE AND GREEN LINES IN THE PICTURE
CHECK/REPLACE R517 (P/N# 1-216-355-91) , IC500,IC301


SONY
KV27XBR60
N/A
DEAD SET -RELAY DOES CLICK - SET MAY COME ON AFTER BEING PLUGGED IN AND TURN ON FOR 5-10 MINUTE,THEN HAS NARROW PIX
CHECK/REPLACE C665 (1000uF @ 25)


SONY
KV27XBR60
N/A
PICTURE BLANKS ON IN-ACTIVE STATIONS
CHECK/REPLACE D303 ON THE 'A' BOARD


SONY
KV27XBR60
N/A
INTERMITTENT LUMINANCE
CHECK/RESOLDER CONNECTIONS ON DL-302


SONY
KV27XBR60
ANU1
REPEATED FAILURE OF THE HORZ. OUTPUT XSTR.
CHECK/REPLACE WITH NEW TYPE P/N# 8-729-016-32 AND CHANGE R523 TO A 0.68 ohm P/N# 1-216-347-11


SONY
KV27XBR65
N/A
CLOCK RUNS TOO FAST
CHANGE C125 TO A 0.1uF @ 50v CAPACITOR (P/N# 1-124-463-00)


SONY
KV27XBR65
N/A
CLOCK RUNS TOO FAST
ADD 0.1uF TO BASE OF Q105 TO GROUND (P/N# 1-124-463-00)


SONY
KV27XBR65
N/A
PINCUSHION DISTORTION
CHECK/REPLACE L501,R571 AND Q505 AND CHECK TO SEE IF D512 IS PENETRATING THRU CIRCUIT BOARD


SONY
KV27XBR65
N/A
RETRACE LINES VISIBLE AT THE TOP OF SCREEN
CHECK TO SEE IF SERVICE MODE 'REF' IS SET CORRECTLY - IT SHOULD BE SET AT 1 BUT RETRACE WILL APPEAR WHEN SET TO 0


SONY
KV27XBR65
N/A
PICTURE BLANKS ON IN-ACTIVE STATIONS
CHECK/REPLACE D303 ON THE 'A' BOARD


SONY
KV27XBR65
N/A
INTERMITTENTLY GOES DEAD - DEAD SET - SHUTS OFF
CHECK/RESOLDER CONNECTIONS ON IC581 AND IC582


SONY
KV27XBR65
N/A
NO PICTURE BUT DOES HAVE SOUND
CHECK/RESOLDER CONNECTIONS ON T501


SONY
KV27XBR65
N/A
HORZ RED,BLUE AND GREEN LINES IN THE PICTURE
CHECK/REPLACE R517 (P/N# 1-216-355-91) , IC500,IC301


SONY
KV27XBR65
N/A
DEAD SET -RELAY DOES CLICK - SET MAY COME ON AFTER BEING PLUGGED IN AND TURN ON FOR 5-10 MINUTE,THEN HAS NARROW PIX
CHECK/REPLACE C665 (1000uF @ 25)


SONY
KV27XBR65
N/A
MANUAL POWER BUTTON WILL NOT WORK
CHECK/REPLACE C125 - REPLACE WITH A BI-POLAR TYPE (P/N# 1-124-272-91)


SONY
KV27XBR65
N/A
INTERMITTENT LUMINANCE
CHECK/RESOLDER CONNECTIONS ON DL-302


SONY
KV27XBR65
ANU1
REPEATED FAILURE OF THE HORZ. OUTPUT XSTR.
CHECK/REPLACE WITH NEW TYPE P/N# 8-729-016-32 AND CHANGE R523 TO A 0.68 ohm P/N# 1-216-347-11


SONY
KV27XBR91
N/A
DEAD SET -RELAY DOES CLICK - SET MAY COME ON AFTER BEING PLUGGED IN AND TURN ON FOR 5-10 MINUTE,THEN HAS NARROW PIX
CHECK/REPLACE C665 (1000uF @ 25)


SONY
KV27XBR91
N/A
INTERMITTENT LUMINANCE
CHECK/RESOLDER CONNECTIONS ON DL-302


SONY
KV27XBR91
N/A
INTERMITTENT CLOSED CAPTION CHARACTER ERROR IN WEAK SIGNAL CONDITIONS - MAY SHOW A WHITE CHARACTER OR BLACK BOX
CHANGE VALUE OF R3443 FROM 470 TO A 100 (P/N# 1-216-025-00)


SONY
KV27XBR91
N/A
INTERMITTENTLY GOES DEAD - DEAD SET - SHUTS OFF
CHECK/RESOLDER CONNECTIONS ON IC581 AND IC582


SONY
KV27XBR95
N/A
DEAD SET -RELAY DOES CLICK - SET MAY COME ON AFTER BEING PLUGGED IN AND TURN ON FOR 5-10 MINUTE,THEN HAS NARROW PIX
CHECK/REPLACE C665 (1000uF @ 25)


SONY
KV27XBR95
N/A
RELAY WILL NOT CLICK WHEN POWER BUTTON IS PUSHED
CHECK/REPLACE IC1401 (P/N# 8-759-246-70)


SONY
KV27XBR95
N/A
INTERMITTENT LUMINANCE
CHECK/RESOLDER CONNECTIONS ON DL-302


SONY
KV27XBR95S
N/A
INTERMITTENT VOLUME IN THE SURROUND SOUND MODE
CHECK/REPLACE X-3 BOARD (P/N# A-1394-367-A)


SONY
KV2970R
N/A
POOR PINCUSHION
CHECK/RESOLDER CONNECTIONS ON L509 AT 'EY31' AND IT MAY BE NECESSARY TO REPLACE L510 (P/N# 1-406-607-11)


SONY
KV2975R
N/A
POOR PINCUSHION
CHECK/RESOLDER CONNECTIONS ON L509 AT 'EY31' AND IT MAY BE NECESSARY TO REPLACE L510 (P/N# 1-406-607-11)


SONY
KV29RS10
N/A
DEAD SET
CHECK R607 (P/N# 120293361), Q601/Q602 (P/N# 872901951), VDR601 (P/N# 180728811), VDR602,VDR603 (P/N# 181005311)


SONY
KV29RS15
N/A
DEAD SET
CHECK R607 (P/N# 120293361), Q601/Q602 (P/N# 872901951), VDR601 (P/N# 180728811), VDR602,VDR603 (P/N# 181005311)


SONY
KV29V10C
N/A
DEAD SET - NO REALY CLICK
CHECK/REPLACE IC103


SONY
KV29V10M
N/A
DEAD SET - NO REALY CLICK
CHECK/REPLACE IC103


SONY
KV29V55
N/A
DEAD SET - MISSING 5 VOLT STANDBY VOLTAGE
CHECK/REPLACE IC602 (P/N# 8-759-805-37), R636 (1.5 - P/N# 1-249-383-11) AND D638 (P/N# 8-719-911-19)


SONY
KV29V55
N/A
WON'T STORE THE SERVICE SETTINGS
CHECK/REPLACE IC102 (8-759-251-04)


SONY
KV29XBR85
N/A
PICTURE SMEARED - LOOKS LIKE WEAK CRT
CHECK/REPLACE DIGITAL COMB FILTER


SONY
KV29XBR85
N/A
CLOCK RUNS TOO FAST
ADD 0.1uF TO BASE OF Q2601 TO GROUND (P/N# 1-124-463-00)


SONY
KV29XBR85
ANU1
REPEATED FAILURE OF THE HORZ. OUTPUT XSTR.
CHECK/REPLACE WITH NEW TYPE P/N# 8-729-016-32 AND CHANGE R523 TO A 0.68 ohm P/N# 1-216-347-11


SONY
KV32CX10
N/A
CLOCK RUNS TOO FAST
ADD 0.1uF TO BASE OF Q103 TO GROUND (P/N# 1-124-463-00)


SONY
KV32HSR10
N/A
HORZ. BLACK STREAKING AT TOP AND BOTTOM OF SCREEN
CHECK/REPLACE 12v REGULATOR IC THAT SUPPLIES DYNAMIC CONVERGENCE,FOCUS AND PHASE CIRCUITS


SONY
KV32HSR10
N/A
STRANGE LOOKING BLACK TEARING LINES IN VIDEO
CHECK/REPLACE COMB FILTER (P/N# 1-464-880-11)


SONY
KV32HSR10
N/A
MANUAL POWER BUTTON WILL NOT WORK
CHECK/REPLACE C125 - REPLACE WITH A BI-POLAR TYPE (P/N# 1-124-272-91)


SONY
KV32HSR10
N/A
HORZ RED,BLUE AND GREEN LINES IN THE PICTURE
CHECK/REPLACE R517 (P/N# 1-216-355-91) , IC500,IC301


SONY
KV32HSR10
N/A
CLOCK RUNS TOO FAST
CHANGE C125 TO A 0.1uF @ 50v CAPACITOR (P/N# 1-124-463-00)


SONY
KV32HSR10
N/A
PICTURE BLANKS ON IN-ACTIVE STATIONS
CHECK/REPLACE D303 ON THE 'A' BOARD


SONY
KV32HSR10
N/A
DEAD SET WITH A THUMP THUMP IN SPEAKERS - NO HIGH VOLTAGE
CHECK/REPLACE Q604 (P/N# 8-729-119-78)


SONY
KV32HSR10
N/A
PINCUSHION DISTORTION
CHECK/REPLACE L501,R571 AND Q505 AND CHECK TO SEE IF D512 IS PENETRATING THRU CIRCUIT BOARD


SONY
KV32HSR10
N/A
CLOCK RUNS TOO FAST
ADD 0.1uF TO BASE OF Q105 TO GROUND (P/N# 1-124-463-00)


SONY
KV32HSR10
N/A
RETRACE LINES VISIBLE AT THE TOP OF SCREEN
CHECK TO SEE IF SERVICE MODE 'REF' IS SET CORRECTLY - IT SHOULD BE SET AT 1 BUT RETRACE WILL APPEAR WHEN SET TO 0


SONY
KV32HSR10
N/A
VERTICAL BANDS ACROSS THE SCREEN AND LOSS OF FOCUS
CHECK/RESOLDER CONNECTIONS ON C506


SONY
KV32HSR10
ANU1
REPEATED FAILURE OF THE HORZ. OUTPUT XSTR.
CHECK/REPLACE WITH NEW TYPE P/N# 8-729-016-32 AND CHANGE R523 TO A 0.33 ohm P/N# 1-216-343-00


SONY
KV32S10
N/A
IMPROVEMENT OF POWER SUPPLY CIRCUIT
CHECK/REPLACE JUMPER WIRE LOCATED AT R683 AND R684 WITH A 1 @ 10w RESISTOR (P/N# 1-205-998-11)


SONY
KV32S10
N/A
DEAD SET
CHECK R607 (P/N# 120293361), Q601/Q602 (P/N# 872901951), VDR601 (P/N# 180728811), VDR602,VDR603 (P/N# 181005311)


SONY
KV32S10
N/A
SPEAKERS RATTLE
CHECK TO SEE IF 'SONY' LOGO IS LOOSE, IF SO GLUE IN PLACE - ALSO APPLY A SMALL AMOUNT OF RTV CEMENT TO SPEAKER GROMMETS


SONY
KV32S10
N/A
NO PICTURE DUE TO FAILURE OF IC301
CHECK/REPLACE IC301 AND ADD D308 (P/N# 8-719-110-17) 10v ZENER -

  • Re: SONYAnonymous, Thu Dec 25 4:23pm
    SONY KV27TS29 N/A DEAD SET - NO ATTEMPT TO START CHECK/REPLACE R611/R622 (82k @ 2 watt) SONY KV27TS29 N/A UNIT IS DEAD CHECK/REPLACE Q601,Q602,C643 AND R607 SONY KV27TS29 N/A REPEATED FAILURE OF Q501 ... more
    • Re: SONY — Anonymous, Thu Dec 25 4:25pm
      • sony shutdownfrancis, Mon Oct 11 9:11am
        kv32fs16: high voltage comes on for 5 sec than shut off. look for c628: 100uf-25v on yhe 9v line output ic.
        • sony tv model kv-20M10Cboyax, Mon Oct 17 10:09pm
          pa help sa sony tv model kv-20M10C mataas ang boltahe sa horizontal output,power shuttdown
          • Re: sony tv model kv-20M10CAnonymous, Tue Oct 18 4:50pm
            Not sure your problem but did find this if it's a shutdown problem. REPLACE C517 "A" BOARD. OPEN AND 60 CYCLE GETTING IN THE 13V LINE THAT TRIGGERS THE SHUTDOWN ON. 470MFD 16V.
        • Sony Helpmrhenrybell, Wed Oct 24 6:04pm
          Visit http://fletchersite.com for instant cures and schematics to fix your faulty unit.
Click here to receive daily updates