Lease this WebApp and get rid of the ads.
Anonymous
Re: TOSHIBA
Tue Jan 13, 2004 7:37pm
216.174.155.86 (XFF: 216.174.155.92)


TOSHIBA
CF2772
N/A
DEAD SET - MAY HAVE A SQUEAL FROM POWER SUPPLY
CHECK/REPLACE IC601 (P/N# B0376795), IC801 (P/N# 23319592), D636,D637,D638,D639,D696,D697,R803

TOSHIBA
CF2772B
N/A
PURITY PROBLEMS CAUSED BY DOMING OF THE CRT
CHANGE R218 TO A 100k (P/N 24366104)

TOSHIBA
CF2772R
N/A
PURITY PROBLEMS CAUSED BY DOMING OF THE CRT
CHANGE R218 TO A 100k (P/N 24366104)

TOSHIBA
CF2776
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF2777
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF27C30
N/A
USERS AUDIO AND VIDEO SETTINGS RETURN TO THE FACTORY DEFAULTS
CHECK/REPLACE ICA01 (P/N # 23904309)

TOSHIBA
CF27C30
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF27C30
N/A
PURITY PROBLEMS CAUSED BY DOMING OF THE CRT
CHANGE R218 TO A 68k (P/N 24366683)

TOSHIBA
CF27C40
N/A
INTERMITTENTLY GOES TO GREEN SCREEN LIKE A SHORTED CRT P/N# A7150258 = 6.2v ZENER AND P/N# A7116515 = 1SS176
ADD A 6.2v ZENER (ANODE-PIN 41,IC501 AND CATH.TO CATH D204) ADD 1SS176 (ANODE-PIN 18 C/C BOARD & CATH.-PIN 15 C/C BD.)

TOSHIBA
CF27C40
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF27C50
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF27E30
N/A
THE LETTERS 'EDS' MAY NOT APPEAR ON SCREEN WHILE RECEIVING THE EXTENDED SERVICE DATA
CHECK/REPLACE ICA01 (P/N# 23905641)

TOSHIBA
CF27E30
N5ES
DEAD SET - RELAY CLICKS CHECK/REPLACE Q801 (23905513), F860 (23144511),
C866 (24669010), D872 (23316302), D873 (23316327), D875 (23316333), D876 (23316359)

TOSHIBA
CF27E30
N5ES
LOW B+ AND POOR PINCUSHION ON EACH SIDE
CHECK/REPLACE C884 (P/N# 24640018) 220uF @ 160v

TOSHIBA
CF27E50
N/A
DEAD - NO POWER
CHECK THE DRESSING ON THE WIRE FROM F470 AND PIN #2 OF THE FLYBACK - ADD A LOOP TO THE WIRE AND USE RTV TO SECURE

TOSHIBA
CF27E50
N5ES
DEAD SET - RELAY CLICKS CHECK/REPLACE Q801 (23905513), F860 (23144511),
C866 (24669010), D872 (23316302), D873 (23316327), D875 (23316333), D876 (23316359)

TOSHIBA
CF27E50
N5ES
LOW B+ AND POOR PINCUSHION ON EACH SIDE
CHECK/REPLACE C884 (P/N# 24640018) 220uF @ 160v

TOSHIBA
CF27E55
N5ES
DEAD SET - RELAY CLICKS CHECK/REPLACE Q801 (23905513), F860 (23144511),
C866 (24669010), D872 (23316302), D873 (23316327), D875 (23316333), D876 (23316359)

TOSHIBA
CF27E55
N5ES
LOW B+ AND POOR PINCUSHION ON EACH SIDE
CHECK/REPLACE C884 (P/N# 24640018) 220uF @ 160v

TOSHIBA
CF27F30
N5ES
LOW B+ AND POOR PINCUSHION ON EACH SIDE
CHECK/REPLACE C884 (P/N# 24640018) 220uF @ 160v

TOSHIBA
CF27F30
N5ES
DEAD SET - RELAY CLICKS CHECK/REPLACE Q801 (23905513), F860 (23144511),
C866 (24669010), D872 (23316302), D873 (23316327), D875 (23316333), D876 (23316359)

TOSHIBA
CF27F50
N/A
WHITE DOT NOISE IN THE PIP VIDEO
CHANGE DY10 FROM 3.9v ZENER TO A 4.3v ZENER - ANY OF THESE (P/N# 23316298 OR 23316662 OR 23118626 OR A7116105)

TOSHIBA
CF27F50
N5ES
LOW B+ AND POOR PINCUSHION ON EACH SIDE
CHECK/REPLACE C884 (P/N# 24640018) 220uF @ 160v

TOSHIBA
CF27F50
N5ES
DEAD SET - RELAY CLICKS CHECK/REPLACE Q801 (23905513), F860 (23144511),
C866 (24669010), D872 (23316302), D873 (23316327), D875 (23316333), D876 (23316359)

TOSHIBA
CF2865K
N/A
PURITY PROBLEMS CAUSED BY DOMING OF THE CRT
CHANGE R218 TO A 68k (P/N 24366683)

TOSHIBA
CF3048
N/A
DEAD SET - NO POWER
CHECK/REPLACE R840 (910), R820 (68), C822 (100uF @ 50v), C840 (330uF @ 50v), C841 (22uF @ 50v)

TOSHIBA
CF3048
N/A
NO POWER - DEAD SET
CHECK/REPLACE C840 WITH NEW PART (P/N# 24666331)

TOSHIBA
CF3048
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF3048
N/A
NO POWER - SET WILL NOT TURN ON
CHECK/REPLACE C840 WITH NEW TYPE (P/N 24666331)

TOSHIBA
CF305
N/A
NO RASTER AND NO SOUND
CHECK/REPLACE R416 AND R418

TOSHIBA
CF3052
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF3054
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF306
N/A
NO RASTER AND NO SOUND
CHECK/REPLACE R416 AND R418

TOSHIBA
CF306
TAC8502
FLAGGING WHEN VIEWING COPY GUARDED VCR TAPES
R403 TO 3.0k,ADD 1ss176FA DIODE ACROSS R320,ANDE R321

TOSHIBA
CF3060
N/A
POOR OR NO AFT LOCK
CHECK/ADJUST L171 (AFT COIL) FOR PROPER OPERATION

TOSHIBA
CF3060
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF3060
N/A
NO VERTICAL SWEEP
CHECK/REPLACE C308 (220uF @ 35v HI-TEMP), R327 2.2, AND VERTICAL OUTPUT IC (AN5521 OR ECG1782)

TOSHIBA
CF3060
TAC8952
POOR PINCUSHION - BOWED ON THE SIDES
CHECK/REPLACE QD01 ON PINCUSHION BOARD

TOSHIBA
CF3061
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF3062
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF3063
N/A
WHITE VERTICAL LINE ON RIGHT SIDE OF THE SCREEN ON CERTAIN CABLE SYSTEMS OR CHANNELS
CHANGE RD06 TO 2.2k (24366222) AND RD07 TO 91k (24366913)

TOSHIBA
CF3064
N/A
WHITE VERTICAL LINE ON RIGHT SIDE OF THE SCREEN ON CERTAIN CABLE SYSTEMS OR CHANNELS
CHANGE RD06 TO 2.2k (24366222) AND RD07 TO 91k (24366913)

TOSHIBA
CF3066
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF3066A
N/A
BUZZING NOISE FROM SPEAKER SWITCH WITH SPEAKER SWITCH IN THE OFF MODE
ADD A JUMPER BETWEEN THE NEGATIVE SIDE OF C641 AND THE NEGATIVE SIDE OF C637

TOSHIBA
CF307
TAC8711
HIGH SHRILL NOISE AT THE END OF A WORD
ADD 2.7k BETWEEN LA03 & RB38-3.3uF TO RES AND RB38

TOSHIBA
CF307
TAC8711
FLAGGING WHEN VIEWING COPY GUARDED VCR TAPES
R403 TO 3.0k,ADD 1ss176FA DIODE ACROSS R406,ANDE R412

TOSHIBA
CF3072
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF3072B
N/A
BUZZING NOISE FROM SPEAKER SWITCH WITH SPEAKER SWITCH IN THE OFF MODE
ADD A JUMPER BETWEEN THE NEGATIVE SIDE OF C641 AND THE NEGATIVE SIDE OF C637

TOSHIBA
CF3078
N/A
NO POWER - DEAD SET
CHECK/REPLACE C840 WITH NEW PART (P/N# 24666331)

TOSHIBA
CF3078
N/A
POOR OR NO AFT LOCK
CHECK/ADJUST L171 (AFT COIL) FOR PROPER OPERATION

TOSHIBA
CF3078
N/A
INTERMITTENT AUDIO AND MAY BE ONLY ON CERTAIN CHANNELS
CHECK/REPLACE QB80 AND R448

TOSHIBA
CF3078
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF3078
N/A
NO POWER - SET WILL NOT TURN ON
CHECK/REPLACE C840 WITH NEW TYPE (P/N 24666331)

TOSHIBA
CF3078
N/A
WILL NOT TUNE A CERTAIN BAND OF CHANNELS SUCH AS NO 2-6 OR NO 7-13
CHECK/REPLACE QA63 AND QA64

TOSHIBA
CF3078
N/A
INTERMITTENT AUDIO ON CERTAIN CHANNELS
CHECK QB80 FOR LEAKAGE AND R448 FOR INCREASE

TOSHIBA
CF3078
N/A
AUDIO IS INTERMITTENT OR ONLY CERTAIN CHANNELS HAVE AUDIO
CHECK/REPLACE QB80 FOR LEAKAGE OR R448 FOR A CHANGED VALUE

TOSHIBA
CF30C40
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CF30C40
N/A
MISSING A PRIMARY COLOR - RED,BLUE OR GREEN
CHECK/REPLACE OPEN L905,L906 OR L907 (P/N# 23237981)

TOSHIBA
CF30C50
N/A
LOOSES RED INTERMITTENTLY
CHECK/RESOLDER CONNECTIONS ON R916


  • Re: TOSHIBAAnonymous, Tue Jan 13 7:35pm
    TOSHIBA CF20D40 N/A OSD IS SHIFTED TO LEFT OR RIGHT TOO FAR AFTER REPL. ICA02 **TURN SET ON, PRESS MUTE ONCE, PRESS AND HOLD MUTE AGAIN WHILE PRESSING MENU ON TV,PRESS MENU UNTIL '1E2H' APPEARS, USE... more
    • Re: TOSHIBA — Anonymous, Tue Jan 13 7:37pm
      • Re: TOSHIBAAnonymous, Tue Jan 13 7:38pm
        TOSHIBA CF30C50 N/A NO COLOR - GOOD BLACK AND WHITE PICTURE CHECK/REPLACE C260 FOR LEAKAGE OR SHORT (0.01uF @ 100v) TOSHIBA CF30C50 N/A MISSING A PRIMARY COLOR - RED,BLUE OR GREEN CHECK/REPLACE OPEN... more
        • Re: TOSHIBAAnonymous, Tue Jan 13 7:40pm
          TOSHIBA CF907 N/A LOSS OF VERTICAL DEFLECTION REPLACE IC301,R327--CHANGE D301--ADD 220uF/35V IC301 TOSHIBA CF907 N/A NO COLOR CHECK/REPLACE R491 FOR OPEN TOSHIBA CF907 N/A NO VERTICAL SWEEP AND VERT. ... more
          • Re: TOSHIBAAnonymous, Tue Jan 13 7:41pm
            TOSHIBA CN35E90 N/A CHANNELS WITHOUT A SIGNAL ARE BEING PROGRAMMMED DURING AUTO-PROGRAMMING CHECK/REPLACE CA13 AND CA36 WITH 220pF (P/N# 24474221) TOSHIBA CN35E90 N/A WHEN SWAPPING PIP WITH MAIN AND... more
            • Re: TOSHIBAAnonymous, Tue Jan 13 7:44pm
              TOSHIBA CX2785B N/A BUZZING NOISE FROM SPEAKER SWITCH WITH SPEAKER SWITCH IN THE OFF MODE ADD A JUMPER BETWEEN THE NEGATIVE SIDE OF C641 AND THE NEGATIVE SIDE OF C637 TOSHIBA CX2786 N/A POOR VERTICAL ... more
              • Re: TOSHIBAAnonymous, Tue Jan 13 7:48pm
                TOSHIBA CX32E70 N/A CHANNELS WITHOUT A SIGNAL ARE BEING PROGRAMMMED DURING AUTO-PROGRAMMING CHECK/REPLACE CA13 AND CA36 WITH 220pF (P/N# 24474221) TOSHIBA CX32E70 N/A DEAD SET CHECK/REPLACE F899... more
                • remote sensormary, Thu Apr 8 3:05pm
                  remote sensor appears to not be working. We cannot get it to respond to any universal remotes and no longer have the original remote. Is is possible that the sensor needs replacing. Any suggestions.... more
                • C227T31Jay, Fri Jul 3 7:35pm
                  Remote control no longer turns TV on/off and does not change channels - everything else on remote control works - batteries have been changed several times Can anyone tell me what the problem is and... more
                • Re: TOSHIBAAnonymous, Tue Jan 13 7:57pm
                  Toshiba 27h50 horizontal out blowed (many times) check & change ac 110v power plug and add 470 uf from base of 12v reg to gnd Comments:bad contact on ac plug generate supply peaks that deteriorates... more
                  • CX32C81Anonymous, Mon Oct 27 10:44am
                    no sound, No picture green line goes straight across the middle of the tv
                    • Re: CX32C81Anonymous, Tue Oct 28 9:46am
                      Sounds like no vertical sweep. Check vertical ic and it blown side of ic must check for open resistor and shorted diode feeding dc to vertical. Now also would check qf03 9v regulator for poor... more
                  • ToshibaAnonymous, Mon Sep 6 11:37am
                    Toshiba CE32T11 Customer Complaint: Dead set The TV was dead except that the power LED was on. After checking the standby power and finding it to be ok, I found that there was no drive to the power... more
Click here to receive daily updates