Gene Williams
Re: High-velocity ammo
Fri Apr 20, 2012 08:25
71.254.89.110

Why would you?

Gene Williams

  • High-velocity ammo — Steve Creasy, Thu Apr 19 21:44
    Hi John, I have two sport kings , a 1953 model and a 1981 model. I have been told High-velocity ammo could damage these pistol and I could install stronger recoil springs and shoot High-velocity with ... more
    • High Velocity ammunition — John J. Stimson, Jr., Tue Apr 24 14:40
      Hello Steve, Wolff makes higher force springs for your 1981 pistol. They do not make one for the 1953 model. Perhaps one could be adapted. Personally, I see absolutely no benefit to beating these... more
    • HV ammo. — Steve Stafford, Fri Apr 20 12:15
      Same here--why? HV is almost always less accurate. Also, even if you use a stronger spring, then the slide is just going to rebound back to the breach face with that much more force, so you will now... more
    • Re: High-velocity ammo — Gene Williams, Fri Apr 20 08:25
      • 1200 fps? — Joel lambert, Atmore, AL, Fri Apr 20 19:48
        I have the same question as Gene. My Sport King cycles and operates well with some 1200 fps ammo, but all the sub sonic or standard vel ammo causes at least one malfunction per magazine, two... more
        • 1200 fps? — Steve Stafford, Fri Apr 20 21:04
          I'm not the expert Jaybar is who frequents here is, but I've done a fair share of working on @ 8 HS of various models over the last few years. To my mind they should and do function just fine on SV... more
          • Re: 1200 fps? — Joel lambert, Atmore, AL, Fri Apr 20 22:41
            First thing I do is make sure the ammo drops in the barrel as advised in this forum. I keep gun well cleaned and lubed. My first problem was high feed, I adjusted mag as advised, and it got much... more
            • 1200 fps> — Steve Stafford, Sat Apr 21 07:38
              You might still have multiple small problems; If cartridges are still feeding high that would normally mean you still need to close up the mag lips a few thou. Also make sure the rim is sliding... more
Click here to receive daily updates