Tom Jones SFSD
Thank You for Ship Data!
Sun May 6, 2012 21:17
96.2.25.195

John,

I am sorry, Thank you so much for the look up data! I appreciate it very much and I hope you have data on one more to get you closer to your objectives!

Again, Thank you!

T. Jones II SFSD

  • Model "D" Take Down "I-B" — Tom Jones II, Sat May 5 23:14
    Hello John, Are you at the OGCA show? If so did you find a treasure? Tonight I report on a Model "D" with a type "I-B" take down. This gun has a 6 3/4" barrel with a serial number of 42126 with both... more
    • Model D type I-B — John J. Stimson, Jr., Sun May 6 16:57
      Hello Tom, No gun show for me this weekend. 42,126 shipped as a model D on 6/23/1939 to J. E. Haseltine & Co. Are you sure the follower is a casting. The very early short frame gun used a modified... more
      • Thank You for Ship Data! — Tom Jones SFSD, Sun May 6 21:17
      • Rear sight — Tom Jones SFSD, Sun May 6 21:09
        John, I am sorry I should have been more specific. With respect to the rear sight the base was fine I only had to replace the blade or part number 48. I had to loosen the screw under the slide to... more
    • Barrel Lock Pin — Tom Jones SFSD, Sat May 5 23:27
      John, There is one thing that bothers me about this Model "D" and that is the Barrel Lock Pin, It is longer than any I have seen and/or have on my other guns (Letter Model) At first I thought it... more
      • Pins — John J. Stimson, Jr., Sun May 6 17:22
        Hello Tom, At this late date we can only speculate about why that pis is so long. It is easy to change pins without it being detectable but it should only be necessary if the barrel is changed or set ... more
        • Thank you! — Tom Jones SFSD, Sun May 6 21:15
          John, Thank you for your thoughts. There is no real GOOD reason the 2 sets of lengths are in the same envelop and I believe some one just combined 2 types (Different length.) The pin and barrel do... more
      • Barrel Lock Pin Data — Tom Jones SFSD, Sun May 6 00:24
        John, For what ever it is worth, In my stock of HS parts I have an envelope of the "Barrel lock Pin" and in that envelope is a batch of 85 pins. I measured these pins and came up with 2 groups,... more
Click here to receive daily updates