Lease this WebApp and get rid of the ads.
John J. Stimson, II
Model B
Tue Sep 4, 2018 10:37

Hello Lyman,

88,320 shipped 10/2/1941 to Sloss & Brittain.

Failure to eject or failure to extract? The chamber might look clean but have baked on oil that needs to be scrubbed out. Best approach is a solvent soaked bore brush that you spin slowly in the bore using a hand held drill.

Other causes for bad extraction can be a dry fire dimple in the breech face.

A old or damaged driving spring could also be a contributing factor to your problem.

The source of parts is limited. Numrich offers old used parts and some almost right misc parts.

Brownells, Jack First, and Wisners are other potential sources.

John Stismon

  • Inherited Model 2Lyman Brown, Sat Sep 1 00:10
    Got a model B from deceased relative. 4 1/2 inch barrel, blued finish, black plastic grips, HS in circle on each grip, stamped 88320 below trigger guard - any info appreciated Jams every third round... more
    • Model B — John J. Stimson, II, Tue Sep 4 10:37
    • HS parts sourceBob Gatley, Mon Sep 3 11:36
      Mr. Brown Brownells sells magazines and other parts , so does Numrich. When I replaced my magazine with a new one from Brownells my HE shoots CCI Standard velocity rounds with no failures at all. You ... more
Click here to receive daily updates