Mathew
Are U talking about an FJ40 ? what year's?
Fri Jul 20, 2012 11:12pm
65.190.93.209

OK if it's a 40 you take a Punch and hammer and drive the pin's up. I start with the bottom. Oh first remove any of the door stop part's then roll down window close door then knock out pin's open door and lift it off the Cruiser. You do just the revirse to install. Good luck.

  • door hinges — Andy, Fri Jul 20 5:28pm
    Is there a reason not to use the hinge gaskets, like the ones used on the hood/cowl, when installing the passenger and drivers doors?
    • Re: door hinges — desertpat, Sat Jul 21 12:06pm
      I used them - made my own on all hinge plates at the suggestion of my expert bodyman. There was no problem with fit. Where 2 metal faces meet, a gasket might prevent damage to one or the other... more
    • Are U talking about an FJ40 ? what year's? — Mathew, Fri Jul 20 11:12pm