Lease this WebApp and get rid of the ads.
Fri Oct 14, 2016 16:46

.table{ border-collapse:collapse;} .table td,Website:, .table th{ border:1px solid #cdcdcd; padding:5px;}ZKTel's X2 is a standardized form factor for 10 Gb/s fiber optic transponders that is used for data transfer rates from 10.3 Gb/s to 10.5 Gb/s. It is protocol-specific: Either 10G Ethernet or 10G Fibre Channel versions are available. X2 transponders are used in datacom optical links only (not telecom), and they are smaller than old generation XENPAK transponders. Its electrical interface to the host board is also standardized and is called XAUI (4 x 3.125 Gb/s). We manufactures X2 300m, X2 10km, X2 20km, X2 40km, X2 80km optical modules. All modules support Digital Optical Monitoring (DOM) function .Features:• Hot pluggable X2 MSA form factor• Low total power consumption:• RoHS-6 compliant (lead-free)• Transmission distance 300m, 10km, 40km, 80 km• Cooled 1550nm EML or Uncooled directly modulated Distributed Feedback (DFB)• SC connector, single mode fiber• Full duplex transmission mode• Digital Optics Monitoring (DOM)• Power supply: +5.0 V, +3.3 V• XAUI electrical interface 4 x 3.125 Gb/s Ethernet(FTLX1841E2)• Management and control via MDIO 2-wire bus• 70-pin connector• Separated signal/chassis ground• Mid Pak module variance for front panel mounting• De-latch mechanism with low extraction forceApplication:• 10GBASE-SR 10G Ethernet• 10GBASE-LR 10G Ethernet• 10GBASE-ER 10G Ethernet• 10GBASE-ZR 10G EthernetPackagePart No.Fiber TypeData Rate RangeWavelengthOptical ComponentsDistance Range/Power   BudgetConnectorCase Temperature rangeDDMApplicationFunctionX2ZDAAM39-DCSMMF9.95~11.1G850nmVSCEL/PIN<300mSC-5~70DEthernet,SONET,10GFCX2ZDAD109-DCSSMF9.95~11.1G1310nmDFB/PIN10kmSC-5~70DEthernet,SONET,10GFCX2ZDAD409-DCSSMF9.95~11.1G1550nmEML/PIN40kmSC-5~70DEthernet,SONET,10GFCX2ZDAG809-DCSSMF9.95~11.1G1550nmEML/APD80kmSC-5~70DEthernet,SONET,10GFC

Click here to receive daily updates