Huitong Special Steel Co.,Ltd is a famous China 90 degree elbow manufacturer and supplier, equipped with a productive factory and company and as a professional 90 degree elbow exporter and seller, we are always welcoming you to buy and wholesale high quality 90 degree lr elbow, 90 degree stainless steel elbow, 90 degree carbon steel elbow, 90 degree sr elbow, 90 degree asme b16.9 seamless elbow from our factory.
Htongsteel has emerged as the one stop solution leading provider for all your 90 Degree Elbow requirements. We are one of the largest exporters & distributors of 90 Degree Elbow in China. Our products have been widely used in many fields both at home and abroad. Each department are under perfect management and fully automated production so as to offer the Best Quality Products and Prompt Services to our Clients.
An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180°, 90° or 45° angle, though 22.5elbows are also made. The ends may be machined for butt welding, threaded (usually female), or socketed, etc. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.
Elbows are categorized based on various design features as below:
45 Degree Elbow --- where change in direction required is 45°
90 Degree Elbow --- where change in direction required is 90°
180 Degree Elbow--- where change in direction required is 180°
Surface Finishing: Transparent Oil, Rust-Proof Black Oil or Hot Galvanized.
A 90 degree elbow is also called a "90 bend" or "90 ell". It is a fitting which is bent in such a way to produce 90 degree change in the direction of flow in the pipe. It is used to change the direction in piping and is also sometimes called a "quarter bend". A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. It is available in many materials like silicone, rubber compounds, galvanized steel, etc. The main application of an elbow (90 degree) is to connect hoses to valves, water pressure pumps, and deck drains. These elbows can be made from tough nylon material or NPT thread.