Lease this WebApp and get rid of the ads.
Smart Charger With 4 Slots Applied To Ni-MH, Ni-CD And Li Ba
Tue Oct 18, 2016 11:55
125.120.86.112

Model: VIP-C024B Product parameters: Power input:AC 100-240V,Website:http://www.charger-viwipow.com,  Frequency: (50/60Hz) DC 12 / 2.5A Power output: DC 4.2V±0.02V    0.25A±20mA *4  0.50A±30mA*4  1.0A ±50mA*4 DC 1.48V          0.25A±20mA *4  0.50A±30mA*4  1.0A ±50mA*4 Functions & features:  1). Smart charger with 4 slots applied to Ni-MH, Ni-CD and Li battery. 2). With separate channel charging function. 1/2/3/4 batteries can be charged separately. 3). With micro-computer control technology to support mixed charging mode. 4). The LCD can show the charging state, present voltage and charging current visually. 5). It can charge the mixed batteries among the Ni-MH, Ni-CD and Li battery. 6). The charger can charge the chargeable battery with the diameter below 26mm and with the height between 34-70mm 7). It is compatible with cylindrical battery in different voltage and it charges the Li battery with 3.7V or 3.6V and the Ni-MH & Ni-CD battery with 1.2V. 8). It adopts the charging mode of constant current and constant voltage. 9). With –DV control technology, the charging efficiency is higher. 10). The charger is with DC 12V vehicle input. 11). Only one charging current can be chosen among 0.25A, 0.50A, and 1A (according to battery with different capacity) 12). With battery reverse connection protection, short circuit protection. (LCD display the default current 0.25A and separator) 13). Auto activating function: A. The charger can auto activate the Li battery with zero voltage and it can alarm automatically when the bad battery can not be activated. LCD displays the default current 0.25A and separator. B. The Ni-MH / Ni-CD battery whose voltage is above 0.5V can be activated to be recharged, but the Ni-MH / Ni-CD battery whose voltage is below 0.5V can not be recharged and the charger’s LCD will display default current 0.25A and separator; The charger is with buzzer and it will alarm when any battery is fully charged.Quality control:1). Relevant material check before production. 2). Full test after every individual process finished.3). Spots check after production packed before shipping. 4). All products must go through 3 inspections before production.

Click here to receive daily updates