Lease this WebApp and get rid of the ads.
Top Entry Ball Valve
Tue Jan 9, 2018 03:09
60.176.145.82

Product Description
Naibang top entry ball valves are designed according to API6DSS, API6A, API17D with the addition of customer requirements when present. The valves do not rely on lubricant or grease to assist sealing between the ball and seat. Metal-to-metal sealing is used between the ball and seat and non-elastomeric seal are provided between the seat and body. Metal-to-metal sealing is also provided between body-to-bonnet and stem-to-body (optional).
The top entry ball valve standard configuration is soft seated trunnion mounted with self-relieving seats, anti-blowout stem, antistatic device, fire-safe certified. To comply with technical requests they can be provided with particular features as double block and bleed, double piston effect construction, stem extensions, secondary tightness injection fittings, metal seats, transition pieces and/or pup pieces, special face to face dimensions and bore sizes (piggable), PTFE spring energized lip seals in case of cryogenic applications or hazardous fluids.
These valves have complete flexibility in the use of materials for body and trim along with seal gasket selection. For this reason, they are suitable for the most severe applications which can be encountered onshore, offshore and in the process industry.
top entry ball valve bonnet-body construction allows the use of different grades of carbon steel, stainless steel and exotic alloys thus complying with the most severe service conditions. Top-entry construction is also available for special applications.

Product Range
Nominal Diameter: 1/2"-56"(DN15-DN1400)
Pressure Range: Class 150-900LB(PN16-PN100)
Working Temperature:-196℃-+560℃
Body Materials: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel
Trim: Carbon Steel, Stainless Steel, Duplex Steel
End Connection:RF, BW

Basic Characteristics
API6DSS, API6A, API17D design as requested
Bi-directional sealing
Spring loaded metal-to-metal seats (tungsten carbide coating 0.2mm – 0.4mm thickness)
Anti-blow out design stem
Non-elastomeric seals to avoid the risk of gradual degradation of the seals over their life
Full metal-to-metal sealing at body-bonnet and valve stem
Forged material to comply with API6A PSL3
Valve actuation with dedicated hydraulic actuator and ROV operable Gearbox (fixed or retrievable) url:http://www.nipovalves.com

Click here to receive daily updates