Lease this WebApp and get rid of the ads.
I would lean...
Thu Dec 11, 2014 20:35

towards the trouble side. With latex not being as stable as uros, I would think many things could occur, such as expansion and contraction differences. One way to find out, try it on a test piece.

  • Latex sandwiched in Uro enamels ???Phil, Thu Dec 11 11:13
    Hi folks, I know todays clears are pretty forgiving but thought I'd ask here first. Painting some porcelain pieces for a customer that brought me their own paint. I had to prime them first with the... more
    • Uro over latex baselarge, Fri Dec 19 11:31
      DCC 3000 or 4000 should work just fine. Latex based coatings, because of their water based solvents seldom react to even the hard solvents such as PPG DT series, or even lacquer thinner. I would't... more
      • Still questionGrump, Sun Dec 21 01:39
        the uro's ability to "bite" into a latex with any appreciable degree of adhesion strength. I do agree there should be little to none reaction to any properly dried water based substrate, but would... more
        • Uro over latex . . large, Fri Dec 26 15:34
          Good point . . however, if you want anything coated with Uro and never come off, just lay it paint side up in a room adjacent to the shop . . Then when you're spraying that little piece of Sh-t that... more
    • Re: Latex sandwiched in Uro enamels ???Jay Horton's Private Shop, Fri Dec 12 10:03
      Hi Phil, It's too bad they won't go for having the base color mixed in an automotive base coat, then you could just follow proper procedure (hint-hint). I looked your scenario up on several art... more
      • ThanksPhil, Fri Dec 12 10:35
        Thanks Jay and Grump. I decided to play it safe and mixed HOK base coats to a very close match to the latex. I hate doing work twice ;)
        • Re: ThanksJay Horton's Private Shop, Fri Dec 12 10:51
          Hi Phil, It's probably a far better decision that you made there, fella! I hope it all goes well. Later Jay
    • I would lean... — Grump, Thu Dec 11 20:35
Click here to receive daily updates