Lease this WebApp and get rid of the ads.
Anonymous
Re: TOSHIBA
Tue Jan 13, 2004 7:41pm
216.174.155.86 (XFF: 216.174.155.92)

TOSHIBA
CN35E90
N/A
CHANNELS WITHOUT A SIGNAL ARE BEING PROGRAMMMED DURING AUTO-PROGRAMMING
CHECK/REPLACE CA13 AND CA36 WITH 220pF (P/N# 24474221)

TOSHIBA
CN35E90
N/A
WHEN SWAPPING PIP WITH MAIN AND THEN BACK, THE RIGHT MOST CHARACTER OF THE CHANNEL CAPTION MAY BE GONE OR WRONG CHAR.
CHECK/REPLACE ICA01 (P/N# 23905549)

TOSHIBA
CN35E95
N/A
CHANNELS WITHOUT A SIGNAL ARE BEING PROGRAMMMED DURING AUTO-PROGRAMMING
CHECK/REPLACE CA13 AND CA36 WITH 220pF (P/N# 24474221)

TOSHIBA
CN35E95
N/A
DEAD SET
CHECK/REPLACE F899 (P/N# 23144735 5A GMA) AND Q670 (P/N# B0377324 TA8246H)

TOSHIBA
CN35E95
N/A
WHEN SWAPPING PIP WITH MAIN AND THEN BACK, THE RIGHT MOST CHARACTER OF THE CHANNEL CAPTION MAY BE GONE OR WRONG CHAR.
CHECK/REPLACE ICA01 (P/N# 23905549)

TOSHIBA
CN35F90
N/A
DEAD SET
CHECK/REPLACE F899 (P/N# 23144735 5A GMA) AND Q670 (P/N# B0377324 TA8246H)

TOSHIBA
CN35F95
N/A
DEAD SET
CHECK/REPLACE F899 (P/N# 23144735 5A GMA) AND Q670 (P/N# B0377324 TA8246H)

TOSHIBA
CP21E46
N/A
WHILE IN THE DEMO MODE, THE MENU ITEM 'PIC' MAY APPEAR INSTEAD OF 'ADV'
CHECK/REPLACE ICA01 TO (P/N# 23905667)

TOSHIBA
CS20E26
N/A
NOT TUNING ALL STATIONS OR NOT TUNING AT ALL
CHECK/REPLACE G001 (P/N# 23316694) 33v ZENER AND/OR TUNER (P/N# 23321147)

TOSHIBA
CT907C
N/A
NO VERTICAL SWEEP AND VERT. OUT IC MAY BE VERY HOT
CHECK/REPLACE D320 FOR LEAKAGE (P/N# ECG552)

TOSHIBA
CV27D48
N/A
DARK HORIZ. LINE THAT FLASHES ON TOP OF THE SCREEN AND UNSTABLE COLOR DURING PLAYBACK OF COPY-GUARD SIGNAL
CHANGE C514 (P/N# 24591223) TO NEW VALUE (0.022uF @ 50v)

TOSHIBA
CX1426
N/A
HORZ. PHASE OFF - NO COLOR AND HORZ. BLANKING BAR IS IN THE CENTER OF THE SCREEN
CHECK/REPLACE R402 FOR OPEN (27k)

TOSHIBA
CX1435
N/A
HORZ. PHASE OFF - NO COLOR AND HORZ. BLANKING BAR IS IN THE CENTER OF THE SCREEN
CHECK/REPLACE R402 FOR OPEN (27k)

TOSHIBA
CX1436
N/A
FLAGGING WHEN VIEWING COPY GUARDED VCR TAPES
R403 TO 3.0k,ADD 1ss176FA DIODE ACROSS R406,ANDE R412

TOSHIBA
CX1466
N/A
HORZ. PHASE OFF - NO COLOR AND HORZ. BLANKING BAR IS IN THE CENTER OF THE SCREEN
CHECK/REPLACE R402 FOR OPEN (27k)

TOSHIBA
CX1467
N/A
HORZ. PHASE OFF - NO COLOR AND HORZ. BLANKING BAR IS IN THE CENTER OF THE SCREEN
CHECK/REPLACE R402 FOR OPEN (27k)

TOSHIBA
CX2006
N/A
HORZ. PHASE OFF - NO COLOR AND HORZ. BLANKING BAR IS IN THE CENTER OF THE SCREEN
CHECK/REPLACE R402 FOR OPEN (27k)

TOSHIBA
CX2007
N/A
WILL NOT TURN ON BUT RELAY DOES TRY TO CHATTER
CHECK/REPLACE CE12 (100uF @ 250V)

TOSHIBA
CX2015
N/A
HORZ. PHASE OFF - NO COLOR AND HORZ. BLANKING BAR IS IN THE CENTER OF THE SCREEN
CHECK/REPLACE R402 FOR OPEN (27k)

TOSHIBA
CX2016
N/A
HORZ. PHASE OFF - NO COLOR AND HORZ. BLANKING BAR IS IN THE CENTER OF THE SCREEN
CHECK/REPLACE R402 FOR OPEN (27k)

TOSHIBA
CX2016
TAC8630
VOICE SOUNDS OF 'C','S',AND 'TH' EMPHASIZED
CHNG R636>1k,C610>.012uF,R612>130k

TOSHIBA
CX2025
N/A
HORZ. PHASE OFF - NO COLOR AND HORZ. BLANKING BAR IS IN THE CENTER OF THE SCREEN
CHECK/REPLACE R402 FOR OPEN (27k)

TOSHIBA
CX2036
N/A
HORZ. PHASE OFF - NO COLOR AND HORZ. BLANKING BAR IS IN THE CENTER OF THE SCREEN
CHECK/REPLACE R402 FOR OPEN (27k)

TOSHIBA
CX2036
TAC8635
FLAGGING WHEN VIEWING COPY GUARDED VCR TAPES
R403 TO 3.0k,ADD 1ss176FA DIODE ACROSS R406,ANDE R412

TOSHIBA
CX2036
TAC8635
VOICE SOUNDS OF 'C','S',AND 'TH' EMPHASIZED
CHNG R636>1k,C610>.012uF,R612>130k

TOSHIBA
CX2037
N/A
WILL NOT TURN ON BUT RELAY DOES TRY TO CHATTER
CHECK/REPLACE CE12 (100uF @ 250V)

TOSHIBA
CX2040
N/A
HORZ. PHASE OFF - NO COLOR AND HORZ. BLANKING BAR IS IN THE CENTER OF THE SCREEN
CHECK/REPLACE R402 FOR OPEN (27k)

TOSHIBA
CX2046
N/A
WILL NOT TURN ON BUT RELAY DOES TRY TO CHATTER
CHECK/REPLACE CE12 (100uF @ 250V)

TOSHIBA
CX2047
N/A
WILL NOT TURN ON BUT RELAY DOES TRY TO CHATTER
CHECK/REPLACE CE12 (100uF @ 250V)

TOSHIBA
CX2050
N/A
WILL NOT TURN ON BUT RELAY DOES TRY TO CHATTER
CHECK/REPLACE CE12 (100uF @ 250V)

TOSHIBA
CX2054
N/A
FLAGGING WHEN VIEWING COPY GUARDED VCR TAPES
CHNG, R404 TO 6.8k

TOSHIBA
CX2057
N/A
WILL NOT TURN ON BUT RELAY DOES TRY TO CHATTER
CHECK/REPLACE CE12 (100uF @ 250V)

TOSHIBA
CX2060
N/A
FLAGGING WHEN VIEWING COPY GUARDED VCR TAPES
R403 TO 3.0k,ADD 1ss176FA DIODE ACROSS R406,ANDE C401

TOSHIBA
CX2066
N/A
NO POWER
CHECK C874,C440,C441,CA15 AT PIN 33 OF ICA01

TOSHIBA
CX2066
N/A
FLAGGING WHEN VIEWING COPY GUARDED VCR TAPES
R403 TO 3.0k,ADD 1ss176FA DIODE ACROSS R406,ANDE C401

TOSHIBA
CX2066
N/A
NO POWER
CHECK/REPLACE C874,C440,C441 AND CA15 AT PIN 33 OF ICA01

TOSHIBA
CX2076
N/A
NO POWER
CHECK/REPLACE C874,C440,C441 AND CA15 AT PIN 33 OF ICA01

TOSHIBA
CX2076
N/A
NO POWER
CHECK C874,C440,C441,CA15 AT PIN 33 OF ICA01

TOSHIBA
CX2076
TAC8770
FLAGGING WHEN VIEWING COPY GUARDED VCR TAPES
R403 TO 3.0k,ADD 1ss176FA DIODE ACROSS R406,ANDE C401

TOSHIBA
CX2078
N/A
NO POWER - SET WILL NOT TURN ON
CHECK/REPLACE C840 WITH NEW TYPE (P/N 24666331)

TOSHIBA
CX2078
N/A
NO POWER,DEAD SET,C820 DAMAGED
CHECK D820,D821,R820,C820 (33uF/200V)

TOSHIBA
CX2078
N/A
NO POWER - DEAD SET
CHECK/REPLACE C840 WITH NEW PART (P/N# 24666331)

TOSHIBA
CX2078
N/A
PIX AND AUDIO CONTROLS DON'T WORK BUT OSD CHNGS.
CHECK QE70,DE70,ICX01,QE05,QE06

TOSHIBA
CX2078
TAC8802
ABNORMAL SOUND IN SAP MODE WHEN TURNED OFF
CHNG. CG80 TO 1uF-CG66 TO .006uF-LG60 TO P/N 23238721

TOSHIBA
CX2088
N/A
ON SCREEN CLOCK RUNS TOO SLOW
CHECK/REPLACE ICA01 WITH NEW VERSION (23319135)

TOSHIBA
CX21319
N/A
NO SOUND OR DISTORTED AUDIO
CHECK/REPLACE R612 (240k) FOR OPEN

TOSHIBA
CX21319
N/A
BRIGHT GREEN SCREEN WITH NO RETRACE LINES
CHECK/REPLACE C205 FOR LEAKY OR SHORT

TOSHIBA
CX21319
TAC8907
DISTORTED AUDIO
REPLACE IC501

TOSHIBA
CX2138
N/A
WILL NOT TURN ON BUT RELAY DOES TRY TO CHATTER
CHECK/REPLACE CE12 (100uF @ 250V)

TOSHIBA
CX2140
N/A
WILL NOT TURN ON BUT RELAY DOES TRY TO CHATTER
CHECK/REPLACE CE12 (100uF @ 250V)

TOSHIBA
CX21449
N/A
NO OR INTERMITTENT SOUND
CHECK/REPLACE IC201 AND Z601 (CERAMIC FILTER)

TOSHIBA
CX21449
N/A
SMEARED O.S.D. BUT TV VIDEO IS NORMAL
CHECK/REPLACE C260 FOR LEAKY

TOSHIBA
CX2150
N/A
WILL NOT TURN ON BUT RELAY DOES TRY TO CHATTER
CHECK/REPLACE CE12 (100uF @ 250V)

TOSHIBA
CX2158
N/A
WILL NOT TURN ON BUT RELAY DOES TRY TO CHATTER
CHECK/REPLACE CE12 (100uF @ 250V)

TOSHIBA
CX2168
N/A
POOR CONTRAST AND ON SCREEN ADJUSTMENT HAS NO EFFECT
CHECK/REPLACE C516 FOR SHORT OR LEAKAGE

TOSHIBA
CX2168
N/A
DEAD SET (FAILURE POSSIBLY CAUSED BY LIGHTNING)
CHECK/REPLACE DR81 (SHORT),SR81 (OPEN) AND T840 FOR LACK OF CURRENT ABILITIES.

TOSHIBA
CX2168
TAC8806
DEAD-RELAY DOESN'T CLICK AND 5V STANDBY VOLTAGE IS LOW
CHECK/REPLACE TUNER (IF LIFTING THE 'BP' LINE ON TUNER TO SEE IF 5V COMES UP)

TOSHIBA
CX2168
TAC8806
ABNORMAL SOUND IN SAP MODE WHEN TURNED OFF
CHNG. CG80 TO 1uF-CG66 TO .006uF-LG60 TO P/N 23238721

TOSHIBA
CX2168
TAC8815
ON-SCREEN CUSTOMER ADJUSTMENTS DO NOT RESPOND ALTHOUGH THE O.S.D. LINES DO MOVE.
CHECK/REPLACE ICX01

TOSHIBA
CX2524
N/A
B&W PIX EXCEPT FOR TOP 1/4 WHERE COLOR MAY FLASH
CHECK C260 (.47uF @ 50V)

TOSHIBA
CX2657
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CX2657J
N/A
PURITY PROBLEMS CAUSED BY DOMING OF THE CRT
CHANGE R218 TO A 91k (P/N 24366913)

TOSHIBA
CX2657J
N/A
SNOWY INTERFERENCE ON LOW BAND VHF-MAY APPEAR MORE ON WEAKER CHANNELS.
REPLACE L860 (TRF9229)

TOSHIBA
CX2668
N/A
NO POWER - DEAD SET
CHECK/REPLACE C840 WITH NEW PART (P/N# 24666331)

TOSHIBA
CX2668
N/A
NO POWER - SET WILL NOT TURN ON
CHECK/REPLACE C840 WITH NEW TYPE (P/N 24666331)

TOSHIBA
CX2668
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CX2675
TAC8520
RAINBOW STRIPES ON A DARK SCENE
R919>20k,R927>22k,R921>24k,R208>1.6k,ADD 330k TO C504

TOSHIBA
CX2767
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CX2767
N/A
NO STEREO SOUND IN SAP MODE
REPLACE R884 WITH A 47 OHM 1/2 WATT

TOSHIBA
CX2767J
N/A
SNOWY INTERFERENCE ON LOW BAND VHF-MAY APPEAR MORE ON WEAKER CHANNELS.
REPLACE L860 (TRF9229)

TOSHIBA
CX2769
N/A
PINCUSHION PROBLEMS
CHECK/REPLACE QD01 - REPLACE WITH A 2SB1016Y (A6639380)

TOSHIBA
CX2769
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CX2769
N/A
NO STEREO SOUND IN SAP MODE
REPLACE R884 WITH A 47 OHM 1/2 WATT

TOSHIBA
CX2769
N/A
PINCUSHION WILL NOT FUNCTION PROPERLY
CHECK/REPLACE QD01 WITH (2SB1016Y) P/N # A6639380

TOSHIBA
CX2769J
N/A
PURITY PROBLEMS CAUSED BY DOMING OF THE CRT
CHANGE R218 TO A 91k (P/N 24366913)

TOSHIBA
CX2778
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CX2778
N/A
INTERMITTENT AUDIO AND MAY BE ONLY ON CERTAIN CHANNELS
CHECK/REPLACE QB80 AND R448

TOSHIBA
CX2778
N/A
NO POWER - DEAD SET
CHECK/REPLACE C840 WITH NEW PART (P/N# 24666331)

TOSHIBA
CX2778
N/A
SHORT VERT. SWEEP--IC501 AND Q301 OK
CHECK R327 AND D301

TOSHIBA
CX2778
N/A
NO POWER,DEAD SET,C820 DAMAGED
CHECK D820,D821,R820,C820 (33uF/200V)

TOSHIBA
CX2778
N/A
NO POWER - SET WILL NOT TURN ON
CHECK/REPLACE C840 WITH NEW TYPE (P/N 24666331)

TOSHIBA
CX2778
N/A
AUDIO IS INTERMITTENT OR ONLY CERTAIN CHANNELS HAVE AUDIO
CHECK/REPLACE QB80 FOR LEAKAGE OR R448 FOR A CHANGED VALUE

TOSHIBA
CX2778
N/A
NO COLOR
REPLACE C517

TOSHIBA
CX2778
N/A
INTERMITTENT AUDIO ON CERTAIN CHANNELS
CHECK QB80 FOR LEAKAGE AND R448 FOR INCREASE

TOSHIBA
CX2778
N/A
WILL NOT TUNE A CERTAIN BAND OF CHANNELS SUCH AS NO 2-6 OR NO 7-13
CHECK/REPLACE QA63 AND QA64

TOSHIBA
CX2779K
N/A
OSD CLOCK LOSES TIME OR RUNS SLOW
CHECK/REPLACE ICA01

TOSHIBA
CX2779K
N/A
PURITY PROBLEMS CAUSED BY DOMING OF THE CRT
CHANGE R218 TO A 91k (P/N 24366913)

TOSHIBA
CX2780
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP

TOSHIBA
CX2780A
N/A
BUZZING NOISE FROM SPEAKER SWITCH WITH SPEAKER SWITCH IN THE OFF MODE
ADD A JUMPER BETWEEN THE NEGATIVE SIDE OF C641 AND THE NEGATIVE SIDE OF C637

TOSHIBA
CX2780A
N/A
PURITY PROBLEMS CAUSED BY DOMING OF THE CRT
CHANGE R218 TO A 100k (P/N 24366104)

TOSHIBA
CX2785
N/A
POOR VERTICAL LINEARITY
CHECK/REPLACE C308 (P/N# 24668221) 220 F @ 35v HI-TEMP


  • Re: TOSHIBAAnonymous, Tue Jan 13 7:40pm
    TOSHIBA CF907 N/A LOSS OF VERTICAL DEFLECTION REPLACE IC301,R327--CHANGE D301--ADD 220uF/35V IC301 TOSHIBA CF907 N/A NO COLOR CHECK/REPLACE R491 FOR OPEN TOSHIBA CF907 N/A NO VERTICAL SWEEP AND VERT. ... more
    • Re: TOSHIBA — Anonymous, Tue Jan 13 7:41pm
      • Re: TOSHIBAAnonymous, Tue Jan 13 7:44pm
        TOSHIBA CX2785B N/A BUZZING NOISE FROM SPEAKER SWITCH WITH SPEAKER SWITCH IN THE OFF MODE ADD A JUMPER BETWEEN THE NEGATIVE SIDE OF C641 AND THE NEGATIVE SIDE OF C637 TOSHIBA CX2786 N/A POOR VERTICAL ... more
        • Re: TOSHIBAAnonymous, Tue Jan 13 7:48pm
          TOSHIBA CX32E70 N/A CHANNELS WITHOUT A SIGNAL ARE BEING PROGRAMMMED DURING AUTO-PROGRAMMING CHECK/REPLACE CA13 AND CA36 WITH 220pF (P/N# 24474221) TOSHIBA CX32E70 N/A DEAD SET CHECK/REPLACE F899... more
          • remote sensormary, Thu Apr 8 3:05pm
            remote sensor appears to not be working. We cannot get it to respond to any universal remotes and no longer have the original remote. Is is possible that the sensor needs replacing. Any suggestions.... more
          • C227T31Jay, Fri Jul 3 7:35pm
            Remote control no longer turns TV on/off and does not change channels - everything else on remote control works - batteries have been changed several times Can anyone tell me what the problem is and... more
          • Re: TOSHIBAAnonymous, Tue Jan 13 7:57pm
            Toshiba 27h50 horizontal out blowed (many times) check & change ac 110v power plug and add 470 uf from base of 12v reg to gnd Comments:bad contact on ac plug generate supply peaks that deteriorates... more
            • CX32C81Anonymous, Mon Oct 27 10:44am
              no sound, No picture green line goes straight across the middle of the tv
              • Re: CX32C81Anonymous, Tue Oct 28 9:46am
                Sounds like no vertical sweep. Check vertical ic and it blown side of ic must check for open resistor and shorted diode feeding dc to vertical. Now also would check qf03 9v regulator for poor... more
            • ToshibaAnonymous, Mon Sep 6 11:37am
              Toshiba CE32T11 Customer Complaint: Dead set The TV was dead except that the power LED was on. After checking the standby power and finding it to be ok, I found that there was no drive to the power... more
Click here to receive daily updates